Bob Paff

Bob Paff

Bob Paff has logged in
Bob Paff updated their profile
Hey Jay,
This should be interesting.
Our own social media platform on ASBN.
LinkedIn has become too corporate and Facebook connections are all over the map.
Yeah, we can do the work on these platforms to try and get it more personal but it still would be nice to start up conversations with people who can relate to what we want to talk about; cars, mechanics, gossip, making and fixing things.
And, not have to figure out how to set it all up.
All they need to do is sign up on ASBN. Everything else is automatic.
It would be cool if this catches on.
I just have to figure out how to let everyone know.
I have been very disappointed at my efforts to try and connect with individuals and businesses through email. I was ready to scrap this whole ASBN thing and retire to oblivion. Someone suggested I run some tests and I found that 95% of my emails never reached my audience because of setups and server errors.
I guess that's what you get when you don't hire professionals. As an auto tech, I can't afford to. Not yet anyway.
So, that means I will start promoting again with hopes of better results this time. There's so much we can accomplish though ASBN.
Together, there's nothing we can't fix.
I've been doing a little stressing over a driveability issue on a 1966 TBird 390. It wants more fuel. It was in storage for 10 years and wasn't running too well when it came in. There was no choke, so I fixed that. Points were worn so I went electronic with a new set of plugs. Then it started to run worse. Brake booster now leaking so I have the hose pinched off. Fuel pressure 4 psi (on the low side) and 1/2 in. of sediment in the filter canister (cleaned that). Carb was also filled with sediment, so I reconditioned that. It feels like a major vacuum leak (won't idle properly without the mixture screws fully open) but no external leak found. The smoke machine failed and had to get a new one. Compression even and leak down test good at 10%. (Engine has less than 1000 miles since rebuild) Thinking of intake leak, (seal area below valve cover) removed it and found little gasket crush at the bottom of runners and oil in the intake runners??? Talked to a couple of machinists and the Ford big block is not affected by intake/head angle mismatch as is GM and there are no optional intake gaskets made. So, I installed new Felpros with the addition of sealant. No difference. I even tried a different carb I had laying around. It's been parked while I catch up with other work. We no longer have a traditional engine scope, so I have been learning how to use the old Snap on Modis for primary and secondary testing. Dying to try it out.
I could use some ideas right about now.
Thanks, Joel for the connection.
I'm hoping to get a good majority of us, on the front line of this industry, to start talking about this issue; the good and the bad.
This is our industry and we should have our voices heard and included in the decision process.
Invite your friends to the conversation.
About Skilled Trades Certification, here in BC. Is it the right move?
Is this long overdue or should we leave things alone?
I think there will be more than just a few who will be against the need of "Skilled Trades Certification". But, personally, it's been a long time coming. I just hope they get things right this time.
Compulsory Certification is a growing concern for us, in this industry. Read this blog for the story.
We are one of three provinces left where anybody with a toolbox can call themselves mechanics or technicians.
What do you think?
Steve made an important point. We've become re & re experts and very few can diagnose a problem.
An information library, resource center and communications network for retail and commercial businesses and all our valued suppliers for one purpose; business growth.
Bob Paff shared a photo
For years we've given the automatic transmission gear selector indicator a nick-name of PRNDL.
Well, someone in GM's design team for this 2007 Pontiac Torrent took us seriously. I couldn't believe it.
What does the 'I' stand for?
A new Social Media platform just for us, in this industry and here in BC
Bob Paff
We Are A Supplier Serving the Businesses
Bob Paff
Advertising Services, Communications, Education & Training, Marketing Services, Other
ASBN Publications
15 380 Ginger Dr
New Westminster
British Columbia
All of BC
604 522 1287
604 522 1287