"Can you reduce your labor bec…
Read more"Hi, I like your shoes.... com…
Read moreEveryone in the shop, except y…
Read moreDoes the pre - '95 vehicle r…
Read moreHow many of you still use a compression tester to diagnose a rough-running problem? How many of you are still doing a compression test as part of a tune-up? Not many, I…
Read moreIf you're in the market for a new scanner, read this first. Over the years I had been hearing the stories of shops having multiple scanners, the highest
Read moreWhen draining a radiator with an old brass drain cock you can control the coolant flow by placing a 90-degree spark plug boot over the collar of the drain cock…
Read moreNeed to clean out corroded small bulb sockets? From you're local hardware store, purchase a brush for prepping copper pipe for soldering. The tool has different sizes for different pipe…
Read moreNeed to hone or sand inside a small tube? Try this. Open a cotter pin and insert the end of a 6 to 8 in. piece of emery cloth (you're…
Read more(I'm not sure where this originated but Eric from Perform-x sent it and I just had to share it) DRILL PRESS: A tall upright machine useful for suddenly snatching flat metal…
Read moreThanks to Eric from Perform-x for this tip. We've all had the issue of having to drill out broken studs or bolts. If it's broken above the surface, at least there's something…
Read moreAre your pliers piled up in a drawer. Eric from Perform-X Auto came up with a simple and really cool idea using an old bird cage.
Read moreThe day after I completed a 4 wheel brake job for this lady, she returned to the shop and started to take a strip out of me. "When I dropped…
Read moreA few years ago, this customer comes in with his 1972 Camaro. He said he got it out of the body shop two months earlier after rear ending a truck…
Read moreThis guy comes in with his 2002 Jimmy and said it was idling a little rough. It was his granddaughter's truck, but he didn't think it would need too much…
Read moreA tow truck drove in one day, with an Olds 88 in tow. The driver and owner get out and the driver explains to me that something in the drive…
Read moreOne Saturday, I was working the floor alone and my wife was working the counter. I was draped across the motor, doing some distributor work on an older chevy 4x4…
Read moreA complaint was received, a few years ago, by the Pontiac Division of General Motors: "This is the second time I have written you, and I don't blame you for not…
Read moreThis guy ran over a mattress and decided to keep going. The ensuing jumble finally whipped around enough to put a tear in the gas tank, the subsequent lack of fuel…
Read moreDumb Tech Stories from a Ford blog site many years ago. Names were removed to protect the guilty:
Read moreQuite a few years ago, I was managing the Speedy Muffler in Kelowna when a young couple came in to have the car checked out.
Read more